Search
Close this search box.

Wood fireplace ME300

SKU: VB00001

Starting at $4,049.00


You want to buy this product ?

Decorative Fireplace Ventis

▪Designed mainly for ambiance
▪Generates enough heat in the event of a power failure
▪EPA qualified under the Low Mass program
▪Incomparable view on the flames
▪Molded refractory stones
▪176 CFM blower included
▪Firescreen doors included
▪Cast iron andirons included
▪8″ Ventis stainless steel anchor plate included
▪Fresh air intake adapter included

Required option: traditional faceplate (VBA1520)

Appliance performance

Fuel type Dry cordwood
Recommended heating area (2) < 1,500 ft² Overall firebox volume 4.25 ft³ Burn rate > 5 kg/h (> 11 lb/h)
Average particulate emission rate (1) 2.9 g/kg
1. This appliance is officially tested and certified by an independent agency.
2. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

General Features

Premium quality blower included (CFM) 176 CFM included
Certified according to applicable standards CAN/USA accredited laboratory
Flue outlet diameter 8″
Recommended chimney diameter 8″
Type of chimney ULC S604, ULC S629, UL S610, UL 103 HT (2100 °F)
Minimum chimney height 15″
Overall dimension (Width) 41 1/8″
Overall dimension (Height) 43 5/8″
Overall dimension (Depth) 27 1/4″
Door type Double, glass with cast iron frame
Door opening size (Width) 30″
Door opening size (Height) 16 1/2″
Glass type Ceramic glass
Glass surface – W x H 28 1/2″ x 17 1/8″
Firebox size (Width) 23 1/8″
Firebox size (Height) 18 5/8″
Firebox size (Depth) 11 3/8″
Maximum log length 20″
Log positioning Loading over width
High-efficiency certified appliance Exempt
Canadian Standard (safety) ULC-S610
USA Standard (safety) UL 127
Warranty Lifetime limited
Shipping weight 511 lb (232 kg)
Combustion technology Non-catalytic
USA Standard (emissions) ASTM 2515 / ASTM 2558
Canadian Standard (emissions) ASTM 2515 / ASTM 2558

Clearances

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

CanadaUnited-States
Clearances – Base of the unit to ceiling**72″72″
Clearances – Combustible top mantle to unit5 1/2″5 1/2″
Clearances – Combustible side mantle to unit0″0″
Clearances – Combustible side wall to unit24″24″
Clearances – Base of the unit to a combustible shelf48″48″

This product interest you ? Contact-us

Contact us and a representative will be happy to answer your questions